Maintenance and use of hairdressing equipment.

1. Operators are better not to leave too long nails or press buttons randomly. Because many instrument panels use soft buttons, the raw materials are relatively brittle, so they simply cause breaks.

2. Operators must pay careful attention to the upper and lower points of the interface between the instrument and the accessories. Often, the touch port is damaged by ignoring the insertion and insertion.

3. Be sure to turn off the power after the operation, otherwise the instrument will burn dry, which will directly shorten the life of the instrument. Equipment protection knowledge of beauty salon equipment.

4. The instrument should not be placed in a humid, direct sunlight, and inflammable and explosive materials in order to avoid occasional damage.

5. The appearance of the instrument must be kept clean, and it is best to conceal it with flannel or gauze when not in use to prevent dust. For instrument accessories such as probes, patches, shovel heads, electrode packs, etc., it must be cleaned by one person at a time. When cleaning, use a dry rag or a wrung wet rag to scrub. Do not wash with water.

6. Cooperative cosmetics must be used in accordance with the requirements of the instrument manual. For example, probes, patches, and spades must not be touched with oily or corrosive cosmetics.

7. All wire accessories are forbidden to be pulled and looped to avoid breaking the power wire, and all instruments are not allowed to enter water.