How do I use the electric scissors

Electric scissors are often used in modern hair cutting tools.Many people keep electric clippers at home and cut their hair at home for young and old people.There are also a lot of people are actively buying electric scissors for a rainy day.Many people may come into contact with the electric scissors for the first time and do not know how to use the electric scissors.This article will introduce the use of electric scissors, I hope to help you oh.

First, the use of electric shears

1. Drop 1-2 drops of white oil on the blade before using the electric shears

2, the body or blade parts in use, there will be some heat, which will not affect its performance

3, electric shear design requires intermittent use, the time is 10 minutes

4. Push the switch forward to work, and push it back to stop working

5, such as a rattling sound, adjust the screw to the outside, the strength is small to the inside can be adjusted

6, because the knife edge is sharp, need to be used with care.If unfavorable, can pull the hair to need to be replaced

Two, the use of electric shear attention

1, when the electromagnetic vibration type electric shears issued a large vibration and noise, the ingot screw loose some, is expected to troubleshoot.In addition, the need to check the tightness of the pressure blade screw, screw is too loose, easy to produce vibration and noise, and can not cut the hair phenomenon.The screw is turned too tightly to shake easily.If the screw is properly tightened, the electric shears will return to normal.When motor type electric shears make large vibration and noise, it is necessary to check whether the motor is reversed, check whether there is looseness between hand and rocker arm, and appropriate adjustment can reduce vibration and noise.

2, if it is found that there are three white roads in the hair rolled by electric scissors, it should be adjusted appropriately.For electromagnetic vibration type electric shears, as long as the ingot screw can be tightened.For motor type electric shears, the brush on the brush rack can be pressed tighter.At the same time to see whether the pressure blade screw is too tight, too tight should be relaxed.

3, each use of the time should not be too long, and pay attention to the use of the knife can not be too large, so as not to burn out the coil.When the temperature of the coil is too high, stop using it.

4. The blade on the electric shears should be refueled frequently, otherwise for a long time, there will be heat and vibration between the upper and lower blades.

5. Due to direct contact with the human body, special attention should be paid to safety.For electric shears with rated voltage of 220V, three-wire power cord must be used and ground wire should be connected.

This paper introduces in detail the use of the electric shear, but also introduced the electric shear should be how to use.If you have a clipper at home, you'd better learn how to use it, and pay special attention to the tips in this article.